Sony protocol manual common

This protocol manual describes various commands provided for projectors VPH-G70 and VPH-D50. Using these commands, an external computer is able to control VPH-G70 and VPH-D50. In the following paragraphs, CONTROLLER means an external device such as a PC which controls VPH-G70 and VPH-D50 using these commands. 2. PROTOCOL SPECIFICATION 2-1. Protocol Procedural Manual The following is intended to orient and assist the Permanent Missions in the various requests they need to make at the Department of State. All requests made to the Department of State, should be made through the OAS Office of Protocol (Protocol/OAS) which serves as a liaison between the Permanent Missions and the This protocol is designed to control the SRP-X700P Digital Powered Mixer from an externally connected computer. Read this manual together with Operating Instructions. Caution The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the This protocol manual describes the basic configuration and basic operations of various commands used for projector. Projector can be controlled using the commands in the List of Commands provided in Section 10 "COMMANDS". Using an external CONTROLLER or SWITCHER, etc., inputs can be switched and the power can also be turned on and off. I have a customer with a new Sony Bravia KDL-52V4100 LCD and it has a RS232 port. I wanted to know if any one had the codes for power on and off as well as the inputs. Thank you in advance. Also if you know if it needs a null modem adapter. In this section: Manufacturer-supplied documents with RS-232/serial and IP networking specifications and commands. For use with all RS-232 or IP compatible control systems. Looking for support on Sony Electronics products? Find updates, firmware, software & driver downloads, manuals, tutorials & frequently asked questions protocol and to make it easier to implement. Additionally, an alternative