Isco 4700 manual

5800 Refrigerated Sampler 1-4 7 Refrigerator Door Protects the collected samples inside the refrigerated compartment. 8 Latch Secures the door. The latch mechanism may be locked with a user-supplied padlock. 9 Level Adjustment Feet The sampler includes two level adjustment feet at the front of the sampler. Use these to keep the bottle rack or Isco is continually improving its products and reserves the right to change specifications without notice. ©1999 Isco, Inc. • Printed in U.S.A. • #2210DSSA • 5/99 Isco 6700 Full-size Portable Sampler Specifications Ordering Information Contact the factory or your Isco representative for additional specifications. www.isco.com operation of the equipment. Teledyne Isco recommends that you read this manual completely before placing the equipment in service. Although Teledyne Isco designs reliability into all equipment, there is always the possi-bility of a malfunction. This manual may help in diagnosing and repairing the malfunc-tion. product manual. (Product manuals are available for review online at . www.campbellsci.com.) Products not manufactured by CSI, but that are resold For example, the Isco-brand sampler has a 3 second event marker, which is an adequate duration for a 1000 ft cable length. The 10164 does not Flowlink®, Teledyne Isco's proprietary data processing and acquisitio n software to initialize (set up) and access this memory. 1.2 Selection of a Power Source Teledyne Isco offers a variety of power sources to operate the flow meter. For commercially-powered installations, there is the AC Power Supply. Also available is a power Teledyne Isco Mounting Rings Section 1 Preparation 1.1 Introduction This manual describes the preparation and use of Teledyne Isco's sensor mounting systems. Table 1-1, on page 1-8, depicts the possible mounting combina-tions and provides references to the sections of this manual that apply to your sensor and mounting system. For example, to , Teledyne Isco's data processing and